Modern Water Fuel Circuits 

THE STUDENTS OF HYDROGEN HOT RODS

I decided to put this basic entry version circuit at top of this page as most of you all need to fully understand this one first ,

i know most of you will say "God so basic "but yes it is , Keep this version in mind at all times before moving on to the 2020 Circuits.

Remember no salts no electrolyete only distilled water ,

BESURE to put a Gap in your transformer /Choke

as it makes more capacitience to cell.

We can all laugh but remember as of May 2020 many of the so called Best in world  hydrogen companies are still stupidly using electrolysis and have

no idea of VOLTROLYSIS

Simply put  take their business away from them immediatley. 

Febuary 26, 2013

Here is Daniel's power stage that he used in trials and tests with values ​​and everything. 

Sorry for the delay in uploading the scheme but it is not easy to design and upload something that really works well, this one I am uploading works quite well with power supplies from 15 to 350VDC  The coupling with the pulse generator is by a driver for the TLP 250 mosfet, it is like an optocoupler but improved. It works well up to 25Khz. I use an IRFPC60 N-channel mosfet that supports up to 600v but if they are going to feed it with less than 200vcc an IRFP250 or 260 is fine.

Features:

STANS REFERENCE  CIRCUIT 9XB
Power: 15 vdc to 350 vdc.
Maximum current: 4A
Maximum frequency: 25khz
Input: TTL signal (5vcc) 20ma max.

NOTE  BE SURE TO SMALL GAP the E52 2000 Perm Core

hho cell lpm

Cold Process

No electrolyte

HYDROGEN HOT RODS

GO Faster Go Further 

Stanley A Meyer Valid Working Proven Legit Real Truth

High Voltage, Low Current - Water Conductivity

 

•30 Jul 2016

 

How to Measure the Capacitance of Water Cell

•10 Sep 2017

 

How to measure Self Resonant Frequency of the

Stanley A Meyer Water Fuel Cell

 

•23 Oct 2016

 

How to De  Ice Water Cell 

•17 Mar 2015

Remember we want to stay under 25 C so we keep nano bubbles in the water 

 

RESONANCE

 

•17 Mar 2015

 

Andrija Puharich`s Circuit diagram

 •6 May 2017

Stanley and Stephen Meyer based some of their circuit thoughts on Andrija Puharich`s

and Nikola Tesla's circuit Works.

You can continue study on these on the START HERE Test Cell Pages which Proves 

Stanley Meyers Systems work and that he told the truth to save mankind.

 

Stanley Meyer`s RESONANCE Water Electrolysis - DEMONSTRATION

H Bridge  25 Apr 2020

 

Stanley Meyer`s RESONANCE Impedence Matching Circuit A Voltage Doubler with Inductors.   21 Mar 2020

 

Exmaple
1 Set per Phase Leg  total 3 phase Volternator
6 Cells

Mistakes Corrected in Stephen Meyer`s RESONANCE Impedence Matching Circuit A Voltage Doubler with Inductors   21 Mar 2020

 

8XA Circuits 

Stanley Meyer`s RESONANCE Water Electrolysis - DEMONSTRATION

H Bridge  25 Apr 2020

 

This circuit has two pots, one for adjusting the primary coil voltage amplitude and another for adjusting the pulse voltage amplitude of the pulsing during the 'Gate' time.

There are four options for driving the primary coil.

1. Gate time high-Current flows through primary coil during gate time

2. Gate time low-No current flowing through primary coil during gate time

3. Variable pulse voltage amplitude during gate time (via P2)

4. Continuous pulse frequency

 

Both high (resonant) and low (gate) frequencies are provided by a FeelTech function generator which provides independent frequency, duty cycle, and sweep functions. The drive circuit, function generator and VIC coil are all powered by a Ryobi 18V battery and a programmable power supply as seen in previous videos. Here you can get the Multisim and image file/schematic

Note this file got damaged i have tried to clean it up from screen shots  if any finds original please email me  and I swap it out to be clearer for builders.  danieldonatelli1@gmail.com 

Stan Meyer's Electrolysis method  ( Circuit blow is only part of box) 

The is the foundation of th Vic Matix. 

•14 Mar 2014

VIC Drive Circuit April 2020

 •29 Apr 2020

 

This circuit has two pots, one for adjusting the primary coil voltage amplitude and another for adjusting the pulse voltage amplitude of the pulsing during the 'Gate' time.

There are four options for driving the primary coil.

1. Gate time high-Current flows through primary coil during gate time

2. Gate time low-No current flowing through primary coil during gate time

3. Variable pulse voltage amplitude during gate time (via P2)

4. Continuous pulse frequency

 

Both high (resonant) and low (gate) frequencies are provided by a FeelTech function generator which provides independent frequency, duty cycle, and sweep functions. The drive circuit, function generator and VIC coil are all powered by a Ryobi 18V battery and a programmable power supply as seen in previous videos. Here you can get the Multisim and image file/schematic

BradK-Hybrid VIC Driver-April 2020.ms14 - 211.53 kB, downloaded 6 times.

Meyer`s "Dual-Layered Multi-Spool"

 •1 Oct 2017

Stephen Meyer`s Waveform replication

 

•2 Sep 2018

Water Resonance Waveform

 •7 Oct 2018

Transformer Searcing the Resonant frequency of Water cell

VERSION Vic common core torroid  prmary secondary and chokes Transformer and GMS 

•9 May 2019 ( this Video was showing the inverted signal from pwm to the switch and pll)

Reference Video put in the Vic Matix Rresonance Tab)

Water Resonance waveform with Bifilar Inductor                        SYNCHRONIZATION CIRCUIT

Water Resonance waveform with VIC - Transformer

 •19 Nov 2018

 

The Bifilar inductor - the most important part of Meyer`s invention

•20 Aug 2018

 Home Made Oscilloscope High-Voltage probe 1000:1

 

•4 Jun 2016                 We have a Page for the Custom Probes HERE

Note 1

We can avoid using many expsensive high voltage measuring tools

and some of the high voltage dangers by measuring the magnetic flux

some magnetic flux meters have volts on them for that reason  ,

this allows us the experiementers to have better a safety level and better measuring options with out being directly exposed to High voltage during testng

Differential Oscilloscope probe

 

•22 Sep 2017                                We have a Page for the Custom Probes HERE

Opto-Isolator for Oscilloscope probe

 

•21 May 2017  Ref Andrija Puharich`s Patent US4394230A

 

Frequency doubling - How to the Resonant inductors work

 

•24 Aug 2017

 

Parallel  10 Vic 

Main part of the step charging circuit that people have
\ missed. Everybody thinks that step charging is an effect that
 happens, but it's not.
 Step charging was a forced oscillation.

Replacement for the K7 Laser Accelerator

Meyers TPS Board Connect TPS sender Sensor from all cars Bikes to Meyer GMS VIC Matrix. to make Gas On demand 

•4 th June  2020

 

Note May June 2020

There are about 40  circuit diagrams  to add to this page current and modern working, 

 

Please consider making a Donation if you want to see them  

Using Audrino and Signal Generators

I was hesitating for several years whether or not to put these pictures and videos amongst Stans work. 
The main reason is  that while these microcircuits and chip, board and tools are very modern and great they are in fact heavily based on digital operations. In Some Respects we need simple done first and anologue particulary for the PLL. Phase Lock Loop.
SO I ADVISE  advise people to Start first with 9XB 9XA and Switches
and EEC First. Master those 1st than try circuit above remembering we have over 11 versions which all work we can use all eleven with out this version which is version 5 and 10 11,
The Advatage with looking at these pictures is not to ignore the above modern circuit but to see what to do after you have built 9XB 9XA and Swtiches and use the Circuits above with EEC and H bridge and back switching eec. First then try the following ones. 
If you ignore the advice you will find your self
asking high volt no gas? As many so called all knowing individuals have found out the had way. 
You can than look and study the full VIC Matrix ,  and use the Mini Audrino as daughter board to make a new carry card like Gunther did
handling pulse and gate throttle position sensor and
Consolidate the VIC MATIX onto one board so you have micro controller, filter board and switch. 
(Frequency pulse Generator, Digital Control means card, vic card,
Gas feed back card, Gated Pulse Card all on to filter board. )
So Here I show some pictures for what this would start to look like 
and also a video of what the very very basic one Gunther did when compared to Stans Vic Matix,
 
I would suggest buy it to learn it but use the above diagram to advance it do not base on it too much as we need better than the carry board, the switch from Gunther is excellent to start with.
 
As are many Desk top Signal Generators .
Like Brad Shows in some of his table top tests to driver vic driver or filter board.

Arduino-Stanley-A-Meyer

50% duty cycle pulses and 50% duty cycle gate 2 pots control frequency

and number of pulses in the pulse train

 

2 different versions of the code for

2 different frequency ranges

 

1 hz - 500 hz

 

32 hz - 10 khz

Stanley A Meyer BASIC PWM
Audrino
Here as a Starting Point 
Read more here 
Stanley A Meyer BASIC PWM